Category: Наши разработки

Universal ECU emulator – the device that emulates existance of one or several automotive ECUs. This can be useful, when some ECU cannot be repaired or replaced. If this ECU is not vital it can be emulated

Continue reading →

OBD-II splitter is used to connect several devices to CAN bus simultaniously. This is especially convenient for professionals who are engaged in the diagnosis and repairs of the ECU. Device is also used to sniff bus and diagnostic messages send by diag scanner to the ECU. Similar devices from China is based on wires, practice showed that this is not reliable. Our device is PCB based.

The device is selled as PCB and components. You have to solder them yourself. The plastic box is availble in 3D printer design.

This is an open project, details can be found on GitHub: https://github.com/airbagi/obd2splitter.

Simulates the work of fuses of airbag squibs, active seat belts and other pyrotechnic devices controlled by the Airbag Module. Equipped with two switches for 10 fuses each, which allows to simulate 20 connected devices.

This simple yet highly effective device is the result of many years of work. Table tests are one of the main daily routines performed by repairmen all over the world. This device has everything you need to start and diagnose modules. Built-in fuse, reverse polarity protection.

Powerful (up to 3A) components of the system allow you to perform tasks of different levels of complexity, and the built-in ampere meter allows you to monitor the current consumption.

Each device is assembled by hand, thoroughly calibrated and tested. Premium safety ensured by a completely closed housing.

JLinkZReader program is designed to read and write data contained by the control units of the vehicle.

Currently, the program supports:

• TMS570LS1113, TMS570LS1114
• TMS570LC4357
• SPC560P34

100% Freeware (for TMS570LS1113(4) reading) Download the program here.

The program works with the popular J-Link programmer (version 9 and higher).

Key Features: Tracing (logging) of the CAN bus and CAN FD bus, Searching for CAN identifier of an unrecognized unit, Extracting and Decoding information about DTCs (based on the tracing data), Manufacturing of modules based on simple configuration files (w/out programming). At the moment, various modules have been developed for SRS units.

Web site: http://www.cantracer.ru

A large online image gallery of SRS blocks offered to the attention of professionals. The gallery includes thousands of high-quality macro photos of SRS units. Readable inscriptions on microcircuits and boards, the ability to find out what is hidden under the large-sized elements of circuits, photos of connectors, etc.

More info : https://www.airbagi.ru/base-eng/

CanTracer device — a multifunctional universal device launched both in “desktop-”, and in-car modes. The device is an add-on to the CanTracer software, as well as a stand-alone product designed to perform various tasks.
Currently we’ve got twoCanTracer Device programs:

1. FT-CAN transparent gateway (50kbps, 100kbps, 125kbps) to HS-CAN(500kbps).
2. High-speed standalone SD card logger for data collection from both FT-CAN and HS-CAN

Web-site : http://device.cantracer.ru

Постоянное сотрудничество с производителями микросхем обеспечивает наш склад большой элементной базой, специфичной для автомобильных блоков управления.

При выходе из строя компонента очень важно быстро приобрести работоспособный компонент на его замену. В этом случае можно обратиться к нам!

Одним из востребованных компонентов является драйвер блока управления SRS.

В наличии имеются различные драйвера:

• Bosch 40062
• Bosch 40138
• Apaceatic65v71

и многое другое. По вопросам приобретения используйте форму обратной связи на сайте.